Understanding 3D fence panel sizes starts with a dimensioned drawing rather than a generic product name. Two quotations may describe a 2,030 × 2,500 mm 3D fence panel with 50 × 200 mm mesh, yet quote different weights and prices. Sometimes the discrepancy comes from a different steel diameter. Sometimes it comes from the meaning of the mesh dimension itself. In practice, center-to-center pitch and clear opening are not interchangeable.
This guide explains how to specify 3D V-bend fence sizes, measure a mesh opening correctly and check the details that matter in an international purchase.

User-supplied technical comparison of 55×200 and 50×200 mesh labels; measurement basis must be confirmed.
Table of Contents
3D fence panel sizes: common heights and bend configurations
The following combinations represent commonly requested configurations and indicative selections in our catalog. They are not a universal engineering standard; dimensions and bend locations can be customized to the project.
| Nominal panel height | Typical panel width | Typical number of V bends | Typical use |
|---|---|---|---|
| 1,030 mm | 2,500 mm | 2 | Low boundaries and internal divisions |
| 1,530 mm | 2,500 mm | 3 | Residential, public and commercial boundaries |
| 2,030 mm | 2,500 mm | 4 | General commercial and industrial perimeter fencing |
| 2,530 mm | 2,200–2,500 mm | Drawing-dependent | Taller project-specific enclosures |
Other catalog variations include lower and intermediate heights. Our technical drawings show multiple V-bend layouts; the actual quantity and positions of ribs must be confirmed in the approved drawing. For one popular export configuration, we supply 2,030 × 2,500 mm panels with a 4.0 mm specified coated wire diameter and four folds. Project-specific wire counts can also be specified, such as 17 horizontal wires and 46 vertical wires for a particular drawing. These counts should not be automatically combined with an unrelated 50 mm center-to-center pitch: count and pitch must match the same drawing.

Excerpt from HUACAN catalog showing mesh dimensions, bend profiles and panel heights.
The critical difference: 50 × 200 mm center-to-center versus clear opening
Center-to-center (C/C, pitch) measures the distance between the centerlines of neighboring wires. Clear opening measures the free space between their inner surfaces.
For parallel wires of the same diameter, the relationship is straightforward:
Clear opening = center-to-center pitch − actual wire diameter.
For example, using a 5.0 mm wire:
| What the buyer means | Horizontal wire pitch | Vertical wire pitch | Free opening |
|---|---|---|---|
| 50 × 200 mm C/C | 50 mm | 200 mm | Approximately 45 × 195 mm |
| 50 × 200 mm clear opening | 55 mm | 205 mm | 50 × 200 mm |
In this example, the clear-opening version uses wider wire spacing. With the same panel dimensions, this can mean fewer wires and less total steel, explaining part of a lower price. Some markets use a description such as 55 × 200 mm mesh for the wider-pitch configuration; however, the 200 mm dimension must also be defined as pitch or opening before you assume equivalence.
The principle holds for a 4.0 mm wire too: a 50 mm pitch yields approximately 46 mm of free opening. The actual measured finished wire diameter should be used where a coated product is being checked.
Practical rule: Never accept “50 × 200 mm mesh” as a complete technical specification. Ask the seller to put “center-to-center” or “clear opening” on the drawing in writing.

Technical drawing comparing alternative pitch dimensions on 3D fencing.
How the steel wire diameter is specified
A wire described as 4.0 mm can refer to different production stages:
- The steel-core diameter before zinc coating.
- The galvanized wire diameter entering the welder.
- The completed powder-coated wire diameter measured on the finished fence.
These should not be confused. In one common commercial arrangement, a factory uses a wire of roughly 3.85 mm before the final organic coating and supplies a 4.0 mm finished coated wire, subject to the agreed measuring method and tolerance. This is not automatically a misrepresentation; it is a question of what the contract calls “wire diameter.” A buyer expecting 4.0 mm steel-core wire must say so explicitly.
For a matched comparison, request both steel-core diameter and finished coated diameter, plus tolerances. If galvanizing thickness is relevant, identify it separately instead of trying to infer it from finished diameter alone.
Why a difference of 0.5 mm changes panel weight
For a round steel wire, approximate mass per meter can be estimated as:
Mass (kg/m) ≈ 0.006165 × d², where d is the steel diameter in millimeters. The relationship is proportional to diameter squared.
| Steel wire diameter | Approximate mass per meter | Difference from 4.0 mm |
|---|---|---|
| 3.85 mm | 0.0914 kg | −7.4% |
| 4.0 mm | 0.0986 kg | Baseline |
| 4.5 mm | 0.1248 kg | +26.6% |
| 5.0 mm | 0.1541 kg | +56.3% |
This comparison is for bare steel wire of equal length. It excludes zinc and organic coating, welds, V-bend length additions and edge details. It also does not imply that the final panel weighs exactly the same percentage more, since pitch or wire count may differ.
For example, a drawing with 46 wires nominally 2.03 m long and 17 wires 2.50 m long contains approximately 135.88 m of straight wire before bend-path correction. At 4.0 mm steel-core diameter, that is approximately 13.4 kg of steel before allowances. The actual factory weight will be affected by folds, trims, galvanized coating, the finished wire specification and design tolerances. A post and its accessories are additional components.
Mesh pattern, wire counts and V-bend geometry
The number of vertical wires is governed primarily by panel width and wire pitch; the number of horizontal wires depends on panel height and the chosen pitch or customized spacing. But the starting and ending edge overhangs also matter. It is therefore unsafe to calculate a binding wire count from rounded nominal dimensions alone.
Ask the factory for an approved drawing showing: finished panel width and height; steel or finished wire diameter; exact mesh pitch and measurement method; wire quantity in each direction; V-bend count, height and projection; edge tails; tolerance; and post connection details.
Matching panel dimensions to posts
Panel height and post height are not always identical. With embedded posts, a 2,030 mm panel may use a 2,500 or 2,600 mm post, leaving roughly 500–600 mm nominal embedment, depending on finished level, attachment points and engineered foundation depth. With base-plated posts, a common commercial choice is a post roughly 2,000 mm tall for a 2,030 mm panel. The actual post top elevation and fixing positions need to match the approved installation drawing.
Our post and installation article explains embedded posts, base plates, six-claw clips, wraparound clamps and eight-claw fittings.
A specification comparison that saves money
Before comparing offers, create a single-row comparison for each supplier:
| Checkpoint | What to record |
|---|---|
| Panel | Finished width × height, V-bend count and layout |
| Mesh | Both axes, each marked C/C or clear opening |
| Wire | Steel-core diameter, finished diameter, tolerance |
| Finish | Galvanizing stage, zinc mass, pretreatment, powder grade |
| Post | Shape, section, wall thickness, length, base/embedded type |
| Accessories | Clip type and count, caps, bolts, spare quantity |
| Mass | Actual panel weight and complete-set weight |
| Packing | Panels per pallet, posts per bundle, loading estimate |
If the steel content differs, it is incorrect to attribute the entire price gap to manufacturing margin. Material differences may be the dominant cause. Learn more in our 3D fence purchasing checklist.
Frequently asked questions
Is 50 × 200 mm mesh the same as 55 × 200 mm mesh?
Not automatically. In some quotations the two descriptions reflect a change from clear-opening measurement to center-to-center pitch. Only a dimensioned drawing can confirm whether two offers actually match.
What are the most common 3D fence panel sizes?
Common project requests include 1,030, 1,530, 2,030 and 2,530 mm nominal heights, often with 2,500 mm nominal width. Width, bend count and wire diameter are customizable.
Can a 4.0 mm finished wire have a smaller steel core?
Yes, if the quoted 4.0 mm is explicitly the finished coated diameter. The purchase order should state both steel-core and finished dimensions if this distinction matters.
Need a drawing reviewed? Send WIRE MESH DEPOT your opening definition, panel dimensions, site conditions and quantity via our technical inquiry form; explore the 3D V-bend fence product page for supply options.



