Crab Pot Wire Rolls: 8 Essential Wholesale Checks

Crab trap wire mesh rolls in red, black, yellow, grey, dark green and blue

Crab pot wire rolls are easier to compare when every quotation describes the same wire, coating, dimensions, and packing arrangement. A lower price per roll can mean a shorter roll, lighter steel, a different edge wire, or a different coating process. A clear purchase specification makes those differences visible before you place an order.

Our reference product is a 24 inch × 150 foot roll with 16 gauge main wires, 12.5 gauge reinforced edge wires, and marine-grade, high-adhesion PVC over mesh hot-dip galvanized after welding. This guide uses the confirmed USD 76-per-roll specification to explain eight checks for a wholesale inquiry.

Crab pot wire rolls in six colors arranged on a white background
Color options shown for reference. Confirm the color allocation in the purchase order.

1. Lock the specification of the crab pot wire rolls

Start with a written specification, then request a price against it. “PVC crab wire, one container” leaves too many important details open. The product name should be followed by the main-wire gauge, edge-wire gauge, mesh dimensions, coating sequence, roll width, and roll length.

ItemWIRE MESH DEPOT reference specification
Main wire16 gauge
Reinforced edge wire12.5 gauge
Finished main-wire diameterApproximately 2.4 mm over PVC
Nominal mesh1.5 × 1.5 inch square; measurement convention to be stated in the order
Roll dimensions24 inches × 150 feet
Metric dimensions0.6096 × 45.72 meters
Roll weight32 kg
ProcessBlack iron wire → welding → hot-dip galvanizing after welding → marine-grade, high-adhesion PVC
Reference priceUSD 76 per specified roll; confirm current quotation and trade terms

For US buyers, the paired gauge notation is familiar, but its meaning should remain explicit. Lee Fisher’s square-mesh product listing, for example, also uses 16/12.5 gauge in its title. That market terminology does not replace an agreed dimensional specification for your order.

Our mesh-size and wire-gauge guide explains the difference between steel-core diameter, coated diameter, clear opening, and wire spacing.

2. Compare length and usable material, not roll count alone

The nominal area of a 2 foot × 150 foot roll is 300 square feet. At USD 76 per roll, that is approximately USD 0.253 per nominal square foot. The equivalent nominal area is approximately 27.87 square meters, giving about USD 2.73 per square meter.

These calculations help compare quotes for the same product construction. They do not include fabrication loss or turn a different wire specification into an equivalent product. A cheaper square-foot price may still come with a thinner steel core or a coating process that does not match the order.

For crab pot wire rolls, usable yield also depends on the cutting plan. Include overlap, bends, scrap, and the need to keep a reinforced factory edge on particular panels. Work from a full-width cut list and a trial assembly before estimating the number of traps per roll.

Write the required length into the purchase order. A 150-foot roll and a 155-foot roll are different quantities of material, even if they share the same width and gauge. Our reference price and loading figures on this page are based on the 150-foot roll.

3. Confirm the coating process behind the price

Our crab pot wire rolls are made by welding black iron wire into mesh, hot-dip galvanizing the completed mesh, then applying marine-grade, high-adhesion PVC using a patented process. The sequence is part of the product description and should appear in the supplier’s specification.

Ask each bidder to describe its own process. Do not assume that every colored wire roll has a zinc layer underneath or that every PVC layer has the same adhesion. Request a representative sample and agree how it will be inspected.

When a purchase requires a particular zinc coating mass or a laboratory test, include the requirement before the supplier prices the order. A general coating description cannot establish compliance with an unstated test method or threshold. See our marine-grade PVC coating checklist for the details worth comparing.

Close-up of blue coated wire from crab pot wire rolls showing the metal beneath the coating
Coating detail from the supplied sample photographs. Any contractual test requirements should be agreed separately.

4. Approve colors and a representative sample

Available colors are Red, Yellow, Black, Dark Green, Blue, Lime Green, Purple, Orange, and Grey. State the number of rolls per color. A list saying “mixed colors” is not enough for a packing team to follow accurately.

Use a physical sample where color matching matters. Screens, lighting, and camera settings can make the same roll look different. Record the approved sample reference and photograph the color label together with the material.

The sample should also represent the agreed wire and edge construction. A small section cut entirely from the roll center cannot demonstrate the 12.5 gauge reinforced edge. Ask for a section containing the edge if that feature is important to the finished trap.

Keep the approved reference through production and delivery. Mark which observations are visual checks and which are measured acceptance criteria. This makes a later discrepancy easier to investigate than relying on an unlabelled photograph.

5. Plan container loading and handling

For the specified 32 kg crab pot wire rolls, the non-pallet loading quantities are 220 rolls in a 20-foot container and 550 rolls in a 40HC container, without pallets. Use these figures for the stated roll configuration; changes to roll dimensions or packing may change the loading plan.

ContainerRolls, without palletsCalculated mesh weightRoll value at USD 76 each
20-foot container2207,040 kgUSD 16,720
40HC container55017,600 kgUSD 41,800

The weight calculations multiply the stated roll weight by the roll count. They exclude any additional packing materials. The values are arithmetic totals for the mesh only, not delivered container prices. Freight, handling, clearance, taxes, and other charges depend on the agreed quotation and shipment arrangements.

Tell the supplier how your warehouse will unload and move the rolls. If you need pallets, specify pallet dimensions, access requirements, and packaging expectations before finalizing the load. A palletized shipment needs a revised loading plan rather than reusing the non-pallet count.

Ask for a packing list that identifies quantity, color, roll dimensions, net weight, gross weight, and package markings. Check the final plan with the carrier and receiving warehouse, including the actual container and local transport limits.

6. Define trade terms and quotation scope

USD 76 per roll is a useful product reference, but the trade term has to be stated in the written quotation. Do not treat a unit price as FOB, CIF, or delivered simply because another supplier used that basis.

Include the named port or place, currency, quantity, packaging basis, requested shipping window, and the period for which the quote is valid. Where you want freight included, provide the destination and confirm which local charges are covered.

Crab pot wire rolls are raw material. The reference price does not include finished traps, escape rings, clips, ropes, floats, or other fittings unless those items are specifically added to the quotation. Application photographs show how mesh can be used; they are not a complete packing list.

Compare suppliers on a common basis. A table with separate columns for material, packaging, inland transport, freight, and other agreed charges is easier to evaluate than a single total with unclear inclusions.

7. Set an inspection plan before production

Agree what will be checked and when. For crab pot wire rolls, practical inspection points include roll count, color allocation, dimensions, main and edge construction, visible coating condition, weld continuity, weight, and packing identification.

Define the sampling plan with the supplier or inspector. Identify how many rolls will be opened, where measurements will be taken, and how a discrepancy will be handled. A weight check alone cannot establish that the length, mesh opening, or coating matches the specification.

Request photographs that show the measuring equipment and the sample identification. Close-ups are valuable for details, while wider photographs show that the measurements belong to the actual roll or lot being inspected.

For bending or adhesion checks, agree the procedure instead of asking for a vague “good quality” result. Our coated-wire inspection guide explains how consistent records help separate production variation from damage introduced during handling.

Red and purple crab pot wire rolls with other coated mesh samples
Inspect the roll identification and color allocation as part of shipment preparation.

8. Make the inquiry suitable for repeat orders

A useful inquiry becomes the starting point for repeat supply. Assign a product reference that describes the approved construction and keep any revisions dated. If the mesh, color allocation, packing, or delivery terms change, show the change clearly.

  • Product: square welded crab wire, nominal 1.5 × 1.5 inch mesh.
  • Wire: 16 gauge main wire; 12.5 gauge reinforced edge wire; finished main-wire diameter approximately 2.4 mm.
  • Coating: hot-dip galvanized after welding, then marine-grade, high-adhesion PVC.
  • Roll: 24 inches × 150 feet; stated weight 32 kg.
  • Quantity: total rolls and exact allocation among the selected colors.
  • Packing: without pallets, or a separately specified pallet arrangement.
  • Shipment: destination, requested trade term, and delivery window.
  • Approval: sample reference, dimensional convention, tolerances, and inspection requirements.

Wholesale crab pot wire rolls: common questions

Can I compare suppliers using price per kilogram?

It can be a supporting calculation, but it should not be the main acceptance measure. Different dimensions, steel content, and coating amounts can change weight. Compare the complete specification and usable material first.

Is the 40HC quantity 550 rolls with pallets?

No. The confirmed 550-roll figure is without pallets. The 20-foot figure of 220 rolls is also without pallets. Request a new loading plan if pallets are required.

Can these rolls be ordered for a lobster-trap project?

Send the trap drawing first. A lobster-trap shell may require a heavier main wire or a different layout. Our lobster trap wire selection guide explains the checks before substituting a crab-wire specification.

Get a quotation for crab pot wire rolls

Review the complete crab trap wire mesh product specification, then send WIRE MESH DEPOT your roll quantity, colors, destination, and packing requirements. We can use that information to prepare a quotation with a clearly defined scope.

Scroll to Top