Concrete Wire Mesh | Welded Wire Mesh for Concrete Reinforcement

FOB reference price USD 21.00

FOB reference only. Confirm the pricing unit, specifications and quantity for an up-to-date quotation.

Concrete wire mesh from WIRE MESH DEPOT is specified as welded steel reinforcement for concrete projects. Send the engineer’s mesh schedule, steel grade, wire diameter, spacing and sheet size for a project-based quotation.

  • Plain or deformed wire as required by the approved design.
  • Mesh geometry and dimensions matched to the reinforcement schedule.
  • Inspection documents and bundle identification defined in the order.

Send your reinforcement schedule

Description

Concrete wire mesh is a welded steel grid specified for use as reinforcement within a concrete element. It is often called welded wire reinforcement, reinforcing mesh or, in some markets, welded wire fabric. Australian enquiries may also use the term reo mesh.

WIRE MESH DEPOT works with HUACAN to quote mesh against the project schedule. Material grade, wire properties, spacing and placement requirements belong to the engineered specification and need to be identified before production is agreed.

On this page: Overview · Specifications · Production · Packing & shipping · FAQ · Quote

Concrete Wire Mesh for Reinforcement: Product Overview

Concrete reinforcing mesh provides a prefabricated arrangement of crossing reinforcement wires. It is specified for selected slabs, pavements, precast elements and other designed concrete work. The amount and location of steel depend on the structural or project design, not on a generic mesh size recommendation.

  • Scheduled reinforcement: quote each mesh mark from the approved drawing.
  • Defined geometry: keep longitudinal and transverse wires, spacing and edges clearly identified.
  • Traceable supply: connect bundles and inspection documents to the agreed material and order.
  • Planned handling: select sheet dimensions and bundle weights suitable for the receiving site.

General welded wire mesh panels for fabrication are a different purchasing specification. For reinforcement inside a pipeline weight coating, use concrete weight coating mesh.

Match the Reinforcement Schedule and Material Requirements

A concrete wire mesh order needs more than the opening and outside sheet dimensions. Identify the steel grade, nominal wire diameter or area, plain or deformed wire type, required mechanical properties and applicable document requirements.

Specify longitudinal and transverse spacing separately and use centre-to-centre dimensions where required by the drawing. State edge projections and the identification of each mesh mark. If a regional designation such as A142 or SL82 is used, include the governing standard and the complete schedule rather than assuming the code can be substituted across countries.

The Wire Reinforcement Institute technical resources provide industry information on welded wire reinforcement. A reference link is not a claim that the supplied mesh has a particular certification; the offer and inspection documents must support the project requirement.

Concrete Wire Mesh Specifications

The reference options below support product selection. The final offer and approved drawing define the supplied combination, tolerances and inclusions.

SpecificationOptions and ordering detail
ProductWelded steel wire reinforcement for the approved concrete design.
Wire typePlain or deformed wire as specified; identify requirements in each direction.
Steel gradeProject-designated grade and mechanical-property requirements.
Wire diameter or areaNominal values, tolerances and any required designation on the mesh schedule.
Reference spacing layouts100 × 100, 100 × 200, 150 × 150, 150 × 200 or 200 × 200 mm; project schedule governs.
Sheet dimensionsWidth × length, edge projections, tolerances and mesh marks.
Surface conditionAs required by the project; uncoated steel or another explicitly specified condition.
Testing and documentsMaterial, dimensional and weld-related requirements included in the agreed inspection scope.
PackingIdentified sheet bundles with counts, weights and handling requirements.

Concrete Mesh Is Not a Universal Rebar Replacement

Concrete wire mesh and individual reinforcing bars can both form part of a designed reinforcement system, but they are not interchangeable by appearance or sheet area. The design must define the steel area, grade, geometry, anchorage, laps and placement.

Do not use a purchasing page to choose cover, lap length or reinforcement quantity. Send the issued drawing and any approved changes so the supplied mesh can be quoted against the correct revision. This also helps prevent rework when a site schedule changes after the initial enquiry.

For procurement comparisons, ask each offer to state the same mesh marks, unit basis and document scope. A price per sheet is only comparable when dimensions, wire sizes, grade, quantity and testing requirements match.

Concrete Wire Mesh: Production Sequence

The typical sequence below is adjusted to the approved material and coating route.

  1. Review the reinforcement schedule: Confirm mesh marks, drawing revision, wire types, dimensions and required standards or tests.
  2. Prepare the steel wire: Check the specified material and prepare the approved wire diameters and surface profile.
  3. Set the grid: Position the longitudinal and transverse wires at the required spacing.
  4. Resistance-weld the mesh: Join the intersections according to the agreed production and acceptance requirements.
  5. Inspect the product: Check dimensions, wire arrangement and the agreed material or weld test results.
  6. Identify and bundle: Apply mesh-mark and batch identification, count sheets and prepare the agreed document package.

Concrete Wire Mesh: Packing and Shipping

Concrete wire mesh should be bundled by mesh mark and sheet size, with enough identification to connect the delivered material to the order and inspection records. Separate different wire configurations even when outside sheet dimensions are similar.

Agree bundle weights and lifting arrangements with the receiving contractor. Protect the product from damage during handling and arrange storage appropriate to the specified material condition. The purchase order should define any special protection or transport requirements.

For an export quotation, provide quantities by mesh mark, destination and unloading constraints. Confirm the delivery term and document list before shipment. Container capacity must be checked against both package dimensions and permitted cargo weight.

Concrete Wire Mesh FAQ

Is concrete wire mesh the same as ordinary welded fencing mesh?

No. The grid may look similar, but reinforcement is specified by material properties, geometry, weld requirements and the project design. Do not substitute general fencing mesh.

What does welded wire fabric mean?

It is a historical or regional term used for welded wire reinforcement in concrete. Confirm the intended product with the grade, wire type and schedule because terminology varies.

Can I order by A142, A393 or SL82 alone?

Provide the designation together with the applicable standard, drawing and material requirements. Regional product codes should not be treated as universally interchangeable.

Can concrete wire mesh replace rebar?

Only when the responsible design provides for that reinforcement arrangement. A product quotation cannot approve a structural substitution.

Do you supply plain or deformed wire mesh?

State the required type and properties in the enquiry. The quotation confirms the available manufacturing combination and the documentation included.

Which spacing should I use for a slab?

Follow the project engineer’s reinforcement schedule. The reference spacing examples on this page are not a structural design recommendation.

Are test reports included?

Only the documents listed in the quotation are included. State required standards, sampling and third-party inspection before production so the scope is agreed.

What information is needed for a project quote?

Send drawing revision, mesh marks, grade, wire type and size, spacing, sheet dimensions, quantities, inspection requirements and destination.

Request a Concrete Wire Mesh Quote

Send the approved reinforcement schedule to WIRE MESH DEPOT for a concrete wire mesh quotation. Include the document requirements and delivery destination so the offer covers the complete procurement scope.

Product enquiries are handled under the WIRE MESH DEPOT brand by HUACAN (Hebei Huacan Import and Export Co., Ltd.).

Request a quotation · Explore the wire mesh range

Get a Quote for Your Project

Tell us the product specifications, quantity and delivery destination so we can quote for your project.

Please include the size, specifications and estimated quantity, if known.
Scroll to Top